6,620 Works

Test data for high cycle fatigue on material IN 939 uds at 850 Celsius

K Schneider & BBC Mannheim-Zentrales Labor Für Werkstofftechnik
Data created at BBC Mannheim - Zentrales Labor für Werkstofftechnik (now GE Power) in the context of a COST 50 project to investigate the high cycle fatigue behaviour of unidirectionally solidified nickel base superalloys, during which high cycle fatigue, creep, and tensile tests were performed.

Small punch tensile/fracture test data for Zircaloy 4 material at 20 °C and a displacement rate of .005 mm/s

F De Haan & European Commission JRC
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Test data for low cycle fatigue - strain control on material INCONEL 617 at 850 Celsius

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The Alloy 617 creep rupture data were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the alloy for service at temperatures up to 950°C. Alloy 617 was the prime candidate alloy for construction of the He-He intermediate heat exchanger and hot gas...

Thermo-mechanical fatigue test data for NIMONIC 90 sa material for a temperature range of 400 to 850 °C and a mechanical strain range of .7 % (fifth repeat test)

Beck, T; Rau, K & Universität Karlsruhe-Institut Für Werkstoffkunde I
TMF data for NIMONIC 90 material from tests performed at Universität Karlsruhe - Institut für Werkstoffkunde I (now Karlsruhe Institute of Technology - KIT) in the scope of the FP5 TMF-STANDARD project on thermo-mechanical fatigue (TMF) standardisation (details at http://cordis.europa.eu/project/rcn/58321_en.html). The project addressed the issue of standardisation of TMF testing within the framework of the ISO/TC 164 Working Group on TMF.

Test data for uniaxial creep on material IN 738 lc at 850 Celsius and a stress of 325 MPa (tenth repeat test)

GM McColvin & Henry Wiggin
Data created at Henry Wiggin (now Special Metals Wiggin) in the context of a COST 50 project to investigate the high cycle fatigue behaviour of nickel base alloys, during which high cycle fatigue, creep, and tensile tests were performed.

Test data for high cycle fatigue on material IN 738 lc at 700 Celsius

GM McColvin & Henry Wiggin
Data created at Henry Wiggin (now Special Metals Wiggin) in the context of a COST 50 project to investigate the high cycle fatigue behaviour of nickel base alloys, during which high cycle fatigue, creep, and tensile tests were performed.

Test data for uniaxial creep on material ALLOY 800H irr at 850 Celsius and a stress of 59 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The creep rupture data in this collection were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the candidate constructional alloys for service at temperatures up to 950°C. Several batches of each alloy were investigated and special attention was given to the effects...

Test data for uniaxial tensile on material X10 CrMoVNb 9-1 nt at 350 Celsius

Ersoy F & SCK-CEN
The data collection consists of tensile and fracture toughness test data which were performed in the frame of MATTER project (Grant agreement number 269706). Tensile test data includes tests in air, ArH2 and LBE environments at strain rates ranging from 5E-4 to 5E-7 between RT and 400 Celsius. Fracture toughness test data includes reference tests in air with a speed of 0.2 mm/min at 250 Celsius.

Small punch creep test data for P91 wm material at 600 °C and a load of 250 N

Blagoeva D; Hurst RC & Institute For Energy EC-JRC Petten
The main aim of the thesis is to demonstrate the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Test data for uniaxial creep on material INCONEL 617 at 900 Celsius and a stress of 32.05 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The Alloy 617 creep rupture data were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the alloy for service at temperatures up to 950°C. Alloy 617 was the prime candidate alloy for construction of the He-He intermediate heat exchanger and hot gas...

Test data for uniaxial tensile on material MC2 sc at 600 Celsius

Hähner P & Institute For Energy EC-JRC Petten
In the context of the Brite-EuRam Bi-Metal project, mechanical characterization was undertaken of the joint material combinations MC2/U720FG and U720CG/U720FG. The mechanical testing programme consisted of tests performed on MC2/U720FG and U720CG/U720CG joint samples as well as the bulk materials MC2, U720FG and U720CG. Since MC2 is single crystalline and different in composition to the U720 material, the testing programme was undertaken to establish whether differences existed between the two material combinations as far as...

Test data for uniaxial creep on material INCONEL 617 at 950 Celsius and a stress of 14.94 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The Alloy 617 creep rupture data were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the alloy for service at temperatures up to 950°C. Alloy 617 was the prime candidate alloy for construction of the He-He intermediate heat exchanger and hot gas...

Test data for low cycle fatigue - strain control on material P91 at 550 Celsius

Grybėnas Albertas & Lithuanian Energy Institute (LEI)
The 2010-2012 implementation plan of the European Sustainable Nuclear Industrial Initiative (ESNII), in the frame of the Sustainable Nuclear Energy Technology Platform (SNE TP), establishes a very tight time schedule for the start of construction of the European Gen IV prototypes; namely the construction of the LFR ETPP (European Technology Pilot Plant) Myrrha will start in 2014 and that of the SFR Prototype ASTRID will start in 2017. The GEN IV reactors pose new challenges...

Test data for uniaxial creep on material ALLOY 800H at 950 Celsius and a stress of 6.87 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The creep rupture data in this collection were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the candidate constructional alloys for service at temperatures up to 950°C. Several batches of each alloy were investigated and special attention was given to the effects...

Test data for uniaxial tensile on material HAYNES 282 sa ta at 21 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Small punch test data for S355J2+N steel with 2.5 mm ball diameter

Matthias Bruchhausen & European Commission JRC
Small punch test data for S355J2+N steel with 2.5 mm ball diameter for the determination of the ductile/brittle transition temperature.

Small punch tensile/fracture test data for P92 material and a displacement rate of .00833 mm/s

E. Altstadt M. Houska & Helmholtz-Zentrum Dresden-Rossendorf (HZDR)
Content area for HZDR data created in the scope of the small punch test standardization project.

Uniaxial creep test data for 14 MoV 6 3 material at 550 °C and a stress of 127.81 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The aim of the project was to compare various techniques for the assessment of remaining life for power plant components. The creep tests were designed to provide a series of test pieces with defined creep strains ranging from 0.2 to 5 % for creep damage assessment. In addition, basic rupture data were determined for the steels in the new and service exposed conditions. Several creep laboratories participated in the test programme. At FZ Jülich the...

Small punch creep test data for P91 material at 600 °C and a load of 314 N (repeat test)

Gülçimen, B;Haehner, P;Hurst, R.;De Haan F.;Ramos, C.C; Mendes, J. & Institute For Energy EC-JRC Petten
Data produced during work to evaluate the creep and fracture properties of P91 steel by small punch testing. The tests were performed on material extracted from the same pipe used in the INTEGRITY FP5 Growth Project (GRD 1/10886. 2005.), the data for which are also hosted at the JRC Petten ODIN portal.

Uniaxial creep test data for X10CrMoVNb9 1 - sj material at 575 °C and a stress of 112 MPa

Seliger, P; Tenne, G & Siempelkamp Prüf- Und Gutachter GmbH (SPG)
Data generated in the scope of a project to investigate the influence of weld strength reduction on long-term integrity of power plant components made from heat-resistant martensitic steels.

Test data for uniaxial creep on material INCONEL 617 at 850 Celsius and a stress of 31.87 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The Alloy 617 creep rupture data were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the alloy for service at temperatures up to 950°C. Alloy 617 was the prime candidate alloy for construction of the He-He intermediate heat exchanger and hot gas...

Test data for uniaxial creep on material ALLOY 800H at 900 Celsius and a stress of 38 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The creep rupture data in this collection were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the candidate constructional alloys for service at temperatures up to 950°C. Several batches of each alloy were investigated and special attention was given to the effects...

Test data for high cycle fatigue on material IN 738 lc at 750 Celsius

GM McColvin & Henry Wiggin
Data created at Henry Wiggin (now Special Metals Wiggin) in the context of a COST 50 project to investigate the high cycle fatigue behaviour of Nimocast 739 and 738LC nickel base alloys, during which high cycle fatigue, creep, and tensile tests were performed.

Test data for uniaxial creep on material ALLOY 800H at 900 Celsius and a stress of 10.05 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The creep rupture data in this collection were determined for the high temperature reactor projects (the direct cycle helium turbine project, the nuclear process heat project and the district heating project) of the Federal Republic of Germany and the State of North Rhine Westphalia, the aim being to qualify the candidate constructional alloys for service at temperatures up to 950°C. Several batches of each alloy were investigated and special attention was given to the effects...

Uniaxial creep test data for 13 CrMo 4 4 material at 530 °C and a stress of 161.46 MPa

Ennis, PJ; Offermann, M & Forschungszentrum Juelich-IWE
The aim of the project was to compare various techniques for the assessment of remaining life for power plant components. In this context, creep tests were performed on three grades of low Cr steel, namely 1Cr0.5Mo (DIN 13CrMo 4 4), 0.5Cr0.5Mo0.25V (DIN 14MoV 6 3), and 2.25Cr1Mo (DIN 10CrMo 9 10). The creep tests were designed to provide a series of test pieces with defined creep strains ranging from 0.2 to 5 % for creep...

Registration Year

  • 2011
    63
  • 2013
    201
  • 2014
    1,802
  • 2015
    3,058
  • 2016
    685
  • 2017
    492
  • 2018
    185
  • 2019
    134

Resource Types

  • Dataset
    6,620