32 Works

Datasets of high spatial resolution scans of the airborne ultrasound field of an ultrasonic welding machine either with or without an artificial head at a worker’s sedentary position

Robert Schöneweiß, Christoph Kling & Christian Koch
This dataset contains measuring data which are the result of investigations of the influence of a person on an airborne ultrasound field. These investigations have been conducted within the scope of the EMPIR project 15HLT03: “Ears II - Metrology for modern hearing assessment and protecting public health from emerging noise sources”. In the context of “Ears II”, they served gaining knowledge for occupational safety and health. Here, the aim was to investigate the influence of...

Round robin comparison on quantitative nanometer scale magnetic field measurements by magnetic force microscopy

Xiukun Hu
As a standard tool for nano-scale investigation of magnetic domain structures, magnetic force microscopy (MFM) measures the local stray magnetic field landscape of the measured sample, however, generally providing only qualitative data. To quantify the stray magnetic fields, the MFM system could be calibrated by a so-called transfer function (TF) approach which fully considers the finite extent of the MFM tip. However, albeit being comprehensive, the TF approach is not yet well established, mainly due...

Microphone measurements in the vicinity of wind power plants: Results for the wind park in Gagel, Saxony Anhalt, Germany

Marvin Rust & Christian Koch
This document compiles the results of a sound measurement campaign in the vicinity of a wind park to provide objective data for a quantitative characterisation of noise emission in the infrasound frequency range. Microphone measurements were carried out at a wind park near Gagel, Saxony Anhalt, Germany and were compared with results obtained with microbarometers nearby. The experimental setup, the data acquisition and the analysis are described, and narrowband and octave band spectra are calculated...

Simulation data for \"Examining and explaining the “Generalized Laws of Reflection and Refraction” at metasurface gratings\"

Markus Schake
The provided simulation software enables the immediate replication of the results presented in "Examining and explaining the “Generalized Laws of Reflection and Refraction” at metasurface gratings" and its supplemental materials. The simulation data are structured with respect to the figures presented in the contribution. Each subfolder contains all necessary simulation data to receive the figure from the contribution by running a MATLAB file. Therefore, it is possible to compare the results with full context to...

Sound intensity and sound pressure values after measurements in various surrounding environments.

Spyros Brezas, Volker Wittstock & Fabian Heisterkamp
The files contain the values of acoustical and correction quantities used for the analysis presented in the corresponding report. For scanning measurements, the sound pressure and sound intensity values for each scan path are given. For measurements at discrete points, the sound pressure and sound intensity values at each measurement point are given.

Additional data for the publication \"Optical frequency ratio of a 171Yb+ single-ion clock and a 87Sr lattice clock\"

Sören Dörscher, Nils Huntermann, Roman Schwarz, Richard Lange, Erik Benkler, Burghard Lipphardt, Uwe Sterr, Ekkehard Peik & Christian Lisdat
The enclosed data set provides additional data on the measurements presented in the publication entitled "Optical frequency ratio of a 171Yb+ single-ion clock and a 87Sr lattice clock" in Metrologia (DOI: 10.1088/1681-7575/abc86f).

Dataset for the publication \"A Ti/Pt/Co Multilayer Stack for Transfer Function Based Magnetic Force Microscopy Calibrations summary\"

Baha Sakar, Sibylle Sievers, Alexander Fernández Scarioni, Felipe García-Sánchez, Ilker Öztoprak, Hans Werner Schumacher & Osman Öztürk
Magnetic force microscopy (MFM) is a widespread technique for imaging magnetic structures with a resolution of some 10 nanometers. MFM can be calibrated to obtain quantitative (qMFM) spatially resolved magnetization data in units of A/m by determining the calibrated point spread function of the instrument, its instrument calibration function (ICF), from a measurement of a well-known reference sample. Beyond quantifying the MFM data, a deconvolution of the MFM image data with the ICF also corrects...

Additional data for the publication \"The blackbody radiation shift in strontium lattice clocks revisited\"

Christian Lisdat, Sören Dorscher, Ingo Nosske & Uwe Sterr
The data sets provide additional information on the manuscript including data shown in graphs.

Measurement and simulation data for \"Identification of aliasing effects in measurements of unknown MTFs\"

Markus Schake & Michael Schulz
The provided data set and simulation software enables the immediate replication of the results presented in "Identification of aliasing effects in measurements of unknown MTFs." The research data is structured with respect to the figures presented in the contribution. Each subfolder contains all necessary measurement or simulation data to receive the figure from the contribution by running a MATLAB file. Therefore, it is possible to compare the results with full context to those presented in...

Additional data for the publication \"Improved Limits for Violations of Local Position Invariance from Atomic Clock Comparisons\"

Richard Lange, Niils Huntermann, Johannes M. Rahm, Christian Sammer, Hu Shao, Burghard Lipphardt, Christian Tamm, Stefan Weyers & Ekkehard Peik
Data on measurements of the absolute transition frequency of the Yb+ E3 transition and measurements of the E3 and E2 Yb+ transition frequencies.

Datasets for Multidimensional model to correct PV device performance measurements taken under diffuse irradiation to reference conditions

Fabian Plag, Stefan Riechelmann, Ingo Kröger & Stefan Winter
The datasets provided here contain spectral- and angular-dependent responsivities of three different reference solar cells measured in Plag , et al., 2017, Angular dependent spectral responsivity — Traceable measurements on optical losses in PV devices. Prog Photovolt Res Appl.;1–14. and used in Plag, et al., 2018, Multidimensional model to correct PV device performance measurements taken under diffuse irradiation to reference conditions. The additionally provided uvspec input file allow radiative transfer simulations that are similar to...

Dataset for the calibration of torque measurement under constant rotation in a wind turbine test bench

Paula Weidinger, Gisa Foyer, Stefan Kock, Jonas Gnauert & Rolf Kumme
This dataset is the basis for the publication "Calibration of torque measurement under constant rotation in a wind turbine test bench" accepted for publication in the "Journal of Sensors and Sensor Systems".

Good Practice Guide on Making Rectangular Waveguide Connections at Frequencies above 100 GHz - Measurement data

Karsten Kuhlmann & Thorsten Probst
This dataset contains the results from test measurements used for the document "Good Practice Guide on Making Rectangular Waveguide Connections at Frequencies above 100 GHz" (DOI: 10.7795/530.20190805).

Additional data for the publication ‘Simple and compact diode laser system stabilized to Doppler-broadened iodine-lines at 633 nm’

Florian Krause, Erik Benkler, Christian Nölleke, Patrick Leisching & Uwe Sterr
The data sets provide additional information on the experiments and the physical background discussed in the publication entitled ‘Simple and compact diode laser system stabilized to Doppler-broadened iodine-lines at 633 nm’ in Applied Optics (DOI: 10.1364/AO.409308). Description of the individual files: The file 'Trans_spectrum.dat' provides the normalized iodine transmission data as a function of the laser diode temperature (shown in fig. 2). The file 'nu_R(74)_8-4.dat' provide a time series of the absolute frequency calculated of...

Measurement and simulation data for \"Optical form measurement employing a tiltable line scanning low coherence interferometer for annular subaperture stitching interferometry\"

Markus Schake, Jörg Riebeling, Peter Lehmann & Gerd Ehret
The provided data set and simulation software enables the immediate replication of the results presented in "Optical form measurement employing a tiltable line scanning low coherence interferometer for annular subaperture stitching interferometry." The research data is structured with respect to the figures presented in the contribution. Each subfolder contains all necessary measurement or simulation data to receive the figure from the contribution by running a MATLAB file. Therefore, it is possible to compare the results...

Fractional frequency ratio difference time series data sets (Optical frequency comb comparison)

Erik Benkler, Uwe Sterr, Burghard Lipphardt, Rafal Wilk, Thomas Puppe & Felix Rohde

Simulated simultaneous 18F-NaF PET/MR with physiological motion and ground truth information

Johannes Mayer & Christoph Kolbitsch
This dataset is the basis for the publication "Evaluation of synergistic image registration for motion-corrected coronary NaF-PET-MR" Dataset containing simulated cardiac and respiratory motion of simultaneous PET/MR data with 18F-NaF uptake in the right coronary artery. Supplied are PET and MR images, as well as underlying ground truth motion and regions of interests (ROI) in which the uptake and background signal are located. The dataset is based on the XCAT phantom and a custom simulation...

Dataset for the publication \"Coherent Excitation of the Highly Forbidden Electric Octupole Transition in 172Yb+\"

Henning Fürst, Chih-Han Yeh, Dimitri Kalincev, André Kulosa, Laura Dreissen, Richard Lange, Erik Benkler, Nils Huntermann, Ekkehard Peik & Tanja Mehlstäubler
Measurement data for the publication "Coherent Excitation of the Highly Forbidden Electric Octupole Transition in 172Yb+" by H.A. Fürst et al, Phys. Rev. Lett. 125, 163001 – Published 16 October 2020.

Dataset for the publication \"Mode analysis for long, undamped cantilevers with added diamond tips of varying length for fast roughness measurements\"

Heinrich Behle & Uwe Brand
EMPIR projects are co-funded by the European Union’s (EU) Horizon 2020 research and innovation programme and the EMPIR participating states.

Dataset for the publication \"Using a Tip Characterizer to Investigate Microprobe Silicon Tip Geometry Variation in Roughness Measurements\"

Min Xu, Ziqi Zhou, Thomas Ahbe, Erwin Peiner & Uwe Brand
Given their superior dynamics, microprobes represent promising probe candidates for high-speed roughness measurement applications. Their disadvantage, however, lies in the fact that the volume of the microprobe’s silicon tip decreases dramatically during roughness measurement, and the unstable tip geometry leads to an increase in measurement uncertainty. To investigate the factors that influence tip geometry variation during roughness measurement, a rectangular-shaped tip characterizer was employed to characterize the tip geometry, and a method for reconstructing the...

Dataset of the high-frequency and ultrasound personal exposimeter (HiFUSPEx) validation scans performed in three simulated industrial sound fields

Michal Cieslak, Christoph Kling & Andrea Wolff
All the measurement data contained in this dataset were collected during the performance validation process of the newly developed high-frequency and ultrasound personal exposimeter (HiFUSPEx). The validation process of the HiFUSPEx was performed as a part of the collaborative project of the Physikalisch-Technische Bundesanstalt and the Institute for Occupational Safety and Health of the German Social Accident Insurance titled ”Development of a high-frequency sound exposime- ter for the occupational health protection”. The validation process was...

Dataset for Combining Harmonic Laser Beams by Fiber Components for Refractivity–Compensating Two-Color Interferometry

Xiukun Hu, Anni Röse, Günther Prellinger, Paul Köchert, Jigui Zhu & Florian Pollinger
A perfect spatial overlap with multiple beams of different wavelengths is a prerequisite for multi–wavelength interferometry. Beam combination with the help of fibers seems to be an interesting method for this. We investigated three different types of fiber components, multi–mode wavelength division multiplexers (MM–WDMs), single–mode wavelength division multiplexers (SM–WDMs), and endlessly single–mode polarization maintaining photonic crystal fibers (PM–PCFs). All three seem potential candidates for a perfect spatial overlap of laser beams separated by an octave,...

Catalogue of unfiltered x-ray spectra from tungsten-, molybdenum-, and rhodium-anode-based x-ray tubes with generating voltages from 10kV to 50kV in steps of 1kV

Steffen Ketelhut & Ludwig Büermann
Set of experimental unfiltered x-ray spectra in the range of mammography qualities. The spectra can be computationally filtered to generate a wide range of x-ray spectra in this energy range.

Dataset for Dynamic characterization of multi-component sensors for force and moment

Jan Nitsche, Rolf Kumme & Rainer Tutsch
This Dataset is the basis for the publication "Dynamic characterization of multi-component sensors for force and moment" accepted for publication in "Journal of Sensors and Sensor Systems". It contains acceleration measurement data of a scanning laser vibrometer, displacement measurement of a photogrammetric measurement setup and force measurement of a multi-component force and moment sensor.

Modulation-based long-range interferometry as basis for an optical two-color temperature sensor [Dataset]

Anni Röse, Yang Liu, Paul Köchert, Günther Prellinger, Eberhard Manske & Florian Pollinger
Investigations of an 2f/3f detection scheme for phase detection. The laser frequency of the light source is sinusoidally modulated, and the interferometric phase derived from the harmonic signals. In this article we discuss measurement scheme, approach-included challenges and present first verification experiments over a range of 20m.

Registration Year

  • 2022
    4
  • 2021
    12
  • 2020
    10
  • 2019
    4
  • 2018
    2

Resource Types

  • Dataset
    32