2,624 Works

NOAA-GFDL GFDL-ESM4 model output prepared for CMIP6 CMIP abrupt-4xCO2

John P. Krasting, Jasmin G John, Chris Blanton, Colleen McHugh, Serguei Nikonov, Aparna Radhakrishnan, Kristopher Rand, Niki T. Zadeh, V Balaji, Jeff Durachta, Christopher Dupuis, Raymond Menzel, Thomas Robinson, Seth Underwood, Hans Vahlenkamp, Krista A. Dunne, Paul PG Gauthier, Paul Ginoux, Stephen M. Griffies, Robert Hallberg, Matthew Harrison, William Hurlin, Sergey Malyshev, Vaishali Naik, Fabien Paulot … & Ming Zhao
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NOAA-GFDL.GFDL-ESM4.abrupt-4xCO2' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named GFDL-ESM4, released in 2018, includes the components: aerosol: interactive, atmos: GFDL-AM4.1 (Cubed-sphere (c96) - 1 degree nominal horizontal resolution; 360 x 180 longitude/latitude; 49 levels; top level 1 Pa), atmosChem: GFDL-ATMCHEM4.1 (full atmospheric chemistry), land: GFDL-LM4.1, landIce: GFDL-LM4.1, ocean: GFDL-OM4p5 (GFDL-MOM6, tripolar...

NOAA-GFDL GFDL-ESM4 model output prepared for CMIP6 CMIP piControl

John P. Krasting, Jasmin G John, Chris Blanton, Colleen McHugh, Serguei Nikonov, Aparna Radhakrishnan, Kristopher Rand, Niki T. Zadeh, V Balaji, Jeff Durachta, Christopher Dupuis, Raymond Menzel, Thomas Robinson, Seth Underwood, Hans Vahlenkamp, Krista A. Dunne, Paul PG Gauthier, Paul Ginoux, Stephen M. Griffies, Robert Hallberg, Matthew Harrison, William Hurlin, Sergey Malyshev, Vaishali Naik, Fabien Paulot … & Ming Zhao
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NOAA-GFDL.GFDL-ESM4.piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named GFDL-ESM4, released in 2018, includes the components: aerosol: interactive, atmos: GFDL-AM4.1 (Cubed-sphere (c96) - 1 degree nominal horizontal resolution; 360 x 180 longitude/latitude; 49 levels; top level 1 Pa), atmosChem: GFDL-ATMCHEM4.1 (full atmospheric chemistry), land: GFDL-LM4.1, landIce: GFDL-LM4.1, ocean: GFDL-OM4p5 (GFDL-MOM6, tripolar...

NOAA-GFDL GFDL-ESM4 model output prepared for CMIP6 CMIP

John P. Krasting, Jasmin G John, Chris Blanton, Colleen McHugh, Serguei Nikonov, Aparna Radhakrishnan, Kristopher Rand, Niki T. Zadeh, V Balaji, Jeff Durachta, Christopher Dupuis, Raymond Menzel, Thomas Robinson, Seth Underwood, Hans Vahlenkamp, Krista A. Dunne, Paul PG Gauthier, Paul Ginoux, Stephen M. Griffies, Robert Hallberg, Matthew Harrison, William Hurlin, Sergey Malyshev, Vaishali Naik, Fabien Paulot … & Ming Zhao
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NOAA-GFDL.GFDL-ESM4' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named GFDL-ESM4, released in 2018, includes the components: aerosol: interactive, atmos: GFDL-AM4.1 (Cubed-sphere (c96) - 1 degree nominal horizontal resolution; 360 x 180 longitude/latitude; 49 levels; top level 1 Pa), atmosChem: GFDL-ATMCHEM4.1 (full atmospheric chemistry), land: GFDL-LM4.1, landIce: GFDL-LM4.1, ocean: GFDL-OM4p5 (GFDL-MOM6, tripolar...

IPSL IPSL-CM6A-LR model output prepared for CMIP6 PAMIP futSST-pdSIC

Olivier Boucher, Sébastien Denvil, Guillaume Levavasseur, Anne Cozic, Arnaud Caubel, Marie-Alice Foujols, Yann Meurdesoif, Guillaume Gastineau & Amélie Simon
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.PAMIP.IPSL.IPSL-CM6A-LR.futSST-pdSIC' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named IPSL-CM6A-LR, released in 2017, includes the components: atmos: LMDZ (NPv6, N96; 144 x 143 longitude/latitude; 79 levels; top level 80000 m), land: ORCHIDEE (v2.0, Water/Carbon/Energy mode), ocean: NEMO-OPA (eORCA1.3, tripolar primarily 1deg; 362 x 332 longitude/latitude; 75 levels; top grid cell 0-2...

EC-Earth-Consortium EC-Earth3-AerChem model output prepared for CMIP6 CMIP 1pctCO2

Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.EC-Earth-Consortium.EC-Earth3-AerChem.1pctCO2' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named EC-Earth3-AerChem, released in 2019, includes the components: aerosol: TM5 (3 x 2 degrees; 120 x 90 longitude/latitude; 34 levels; top level: 0.1 hPa), atmos: IFS cy36r4 (TL255, linearly reduced Gaussian grid equivalent to 512 x 256 longitude/latitude; 91 levels; top level 0.01...

LLNL E3SM1.0 model output prepared for CMIP6 CFMIP

Yi Qin, Stephen A. Klein, Mark D. Zelinka & Christophe Golaz
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CFMIP.LLNL.E3SM-1-0' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named E3SM 1.0 (Energy Exascale Earth System Model), released in 2018, includes the components: aerosol: MAM4 with resuspension, marine organics, and secondary organics (same grid as atmos), atmos: EAM (v1.0, cubed sphere spectral-element grid; 5400 elements with p=3; 1 deg average grid spacing;...

IPSL IPSL-CM6A-LR-INCA model output prepared for CMIP6 CMIP historical

Olivier Boucher, Sébastien Denvil, Guillaume Levavasseur, Anne Cozic, Arnaud Caubel, Marie-Alice Foujols, Yann Meurdesoif, Yves Balkanski, Ramiro Checa-Garcia, Didier Hauglustaine, Slimane Bekki & Marion Marchand
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.IPSL.IPSL-CM6A-LR-INCA.historical' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named IPSL-CM6A-LR-INCA, released in 2019, includes the components: aerosol: INCA v6 AER, atmos: LMDZ (NPv6 ; 144 x 143 longitude/latitude; 79 levels; top level 80000 m), land: ORCHIDEE (v2.0, Water/Carbon/Energy mode), ocean: NEMO-OPA (eORCA1.3, tripolar primarily 1deg; 362 x 332 longitude/latitude; 75 levels;...

E3SM-Project E3SM1.1 model output prepared for CMIP6 ScenarioMIP ssp245

David C. Bader, Ruby Leung, Mark Taylor & Renata B. McCoy
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.ScenarioMIP.E3SM-Project.E3SM-1-1.ssp245' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named E3SM 1.1 (Energy Exascale Earth System Model), released in 2019, includes the components: aerosol: MAM4 with resuspension, marine organics, and secondary organics (same grid as atmos), atmos: EAM (v1.1, cubed sphere spectral-element grid; 5400 elements with p=3; 1 deg average grid spacing;...

NCC NorESM2-LM model output prepared for CMIP6 DAMIP ssp245-covid

Øyvind Seland, Mats Bentsen, Dirk Jan Leo Oliviè, Thomas Toniazzo, Ada Gjermundsen, Lise Seland Graff, Jens Boldingh Debernard, Alok Kumar Gupta, Yanchun He, Alf Kirkevåg, Jörg Schwinger, Jerry Tjiputra, Kjetil Schanke Aas, Ingo Bethke, Yuanchao Fan, Jan Griesfeller, Alf Grini, Chuncheng Guo, Mehmet Ilicak, Inger Helene Hafsahl Karset, Oskar Andreas Landgren, Johan Liakka, Kine Onsum Moseid, Aleksi Nummelin, Clemens Spensberger … & Michael Schulz
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.DAMIP.NCC.NorESM2-LM.ssp245-covid' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named NorESM2-LM (low atmosphere-medium ocean resolution, GHG concentration driven), released in 2017, includes the components: aerosol: OsloAero, atmos: CAM-OSLO (2 degree resolution; 144 x 96; 32 levels; top level 3 mb), atmosChem: OsloChemSimp, land: CLM, landIce: CISM, ocean: MICOM (1 degree resolution; 360...

CMCC CMCC-CM2-HR4 model output prepared for CMIP6 CMIP 1pctCO2

Enrico Scoccimarro, Alessio Bellucci & Daniele Peano
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.CMCC.CMCC-CM2-HR4.1pctCO2' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CMCC-CM2-HR4, released in 2016, includes the components: aerosol: prescribed MACv2-SP, atmos: CAM4 (1deg; 288 x 192 longitude/latitude; 26 levels; top at ~2 hPa), land: CLM4.5 (SP mode), ocean: NEMO3.6 (ORCA0.25 1/4 deg from the Equator degrading at the poles; 1442 x 1051...

DWD MPI-ESM1.2-HR model output prepared for CMIP6 ScenarioMIP

Christian Steger, Martin Schupfner, Karl-Hermann Wieners, Fabian Wachsmann, Matthias Bittner, Johann Jungclaus, Barbara Früh, Klaus Pankatz, Marco Giorgetta, Christian Reick, Stephanie Legutke, Monika Esch, Veronika Gayler, Helmuth Haak, Philipp de Vrese, Thomas Raddatz, Thorsten Mauritsen, Jin-Song von Storch, Jörg Behrens, Victor Brovkin, Martin Claussen, Traute Crueger, Irina Fast, Stephanie Fiedler, Stefan Hagemann … & Erich Roeckner
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.ScenarioMIP.DWD.MPI-ESM1-2-HR' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named MPI-ESM1.2-HR, released in 2017, includes the components: aerosol: none, prescribed MACv2-SP, atmos: ECHAM6.3 (spectral T127; 384 x 192 longitude/latitude; 95 levels; top level 0.01 hPa), land: JSBACH3.20, landIce: none/prescribed, ocean: MPIOM1.63 (tripolar TP04, approximately 0.4deg; 802 x 404 longitude/latitude; 40 levels; top...

CAS FGOALS-g3 model output prepared for CMIP6 LS3MIP land-hist-princeton

Binghao Jia, Jinbo Xie, Zhenghui Xie, Peihua Qin, Longhuan Wang, Yan Wang & Ruichao Li
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.LS3MIP.CAS.FGOALS-g3.land-hist-princeton' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named FGOALS-g3, released in 2017, includes the components: atmos: GAMIL3 (180 x 80 longitude/latitude; 26 levels; top level 2.19hPa), land: CAS-LSM, ocean: LICOM3.0 (LICOM3.0, tripolar primarily 1deg; 360 x 218 longitude/latitude; 30 levels; top grid cell 0-10 m), seaIce: CICE4.0. The model was...

CAS FGOALS-g3 model output prepared for CMIP6 PMIP midHolocene

Weipeng Zheng & Li Dong
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.PMIP.CAS.FGOALS-g3.midHolocene' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named FGOALS-g3, released in 2017, includes the components: atmos: GAMIL3 (180 x 80 longitude/latitude; 26 levels; top level 2.19hPa), land: CAS-LSM, ocean: LICOM3.0 (LICOM3.0, tripolar primarily 1deg; 360 x 218 longitude/latitude; 30 levels; top grid cell 0-10 m), seaIce: CICE4.0. The model was...

CNRM-CERFACS CNRM-CM6-1-HR model output prepared for CMIP6 HighResMIP highresSST-present

Aurore Voldoire
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.CNRM-CERFACS.CNRM-CM6-1-HR.highresSST-present' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CNRM-CM6-1-HR, released in 2017, includes the components: aerosol: prescribed monthly fields computed by TACTIC_v2 scheme, atmos: Arpege 6.3 (T359; Gaussian Reduced with 181724 grid points in total distributed over 360 latitude circles (with 720 grid points per latitude circle between 32.2degN and...

CNRM-CERFACS CNRM-CM6-1 model output prepared for CMIP6 DAMIP hist-nat

Aurore Voldoire
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.DAMIP.CNRM-CERFACS.CNRM-CM6-1.hist-nat' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CNRM-CM6-1, released in 2017, includes the components: aerosol: prescribed monthly fields computed by TACTIC_v2 scheme, atmos: Arpege 6.3 (T127; Gaussian Reduced with 24572 grid points in total distributed over 128 latitude circles (with 256 grid points per latitude circle between 30degN and...

CNRM-CERFACS CNRM-ESM2-1 model output prepared for CMIP6 LUMIP hist-noLu

Roland Seferian
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.LUMIP.CNRM-CERFACS.CNRM-ESM2-1.hist-noLu' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CNRM-ESM2-1, released in 2017, includes the components: aerosol: TACTIC_v2, atmos: Arpege 6.3 (T127; Gaussian Reduced with 24572 grid points in total distributed over 128 latitude circles (with 256 grid points per latitude circle between 30degN and 30degS reducing to 20 grid points...

CNRM-CERFACS CNRM-ESM2-1 model output prepared for CMIP6 C4MIP hist-bgc

Roland Seferian
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.C4MIP.CNRM-CERFACS.CNRM-ESM2-1.hist-bgc' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CNRM-ESM2-1, released in 2017, includes the components: aerosol: TACTIC_v2, atmos: Arpege 6.3 (T127; Gaussian Reduced with 24572 grid points in total distributed over 128 latitude circles (with 256 grid points per latitude circle between 30degN and 30degS reducing to 20 grid points...

CSIRO-ARCCSS ACCESS-CM2 model output prepared for CMIP6 FAFMIP faf-water

Abhishek Savita, Simon Marsland, Martin Dix, Doahua Bi, Peter Dobrohotoff, Russell Fiedler, Chloe Mackallah, Arnold Sullivan, Fabio Boeira Dias, Catia Domingues, Nicholas Hannah, Aidan Heerdegen, Andrew Hogg & Kelsey Druken
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.FAFMIP.CSIRO-ARCCSS.ACCESS-CM2.faf-water' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Climate Model Version 2, released in 2019, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), land: CABLE2.5, ocean: ACCESS-OM2 (GFDL-MOM5, tripolar primarily 1deg; 360 x...

CSIRO ACCESS-ESM1.5 model output prepared for CMIP6 CDRMIP esm-pi-cdr-CO2pulse

Tilo Ziehn, Matthew Chamberlain, Andrew Lenton, Rachel Law, Roger Bodman, Martin Dix, Chloe Mackallah, Kelsey Druken & Syazwan Mohamed Ridzwan
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CDRMIP.CSIRO.ACCESS-ESM1-5.esm-pi-CO2pulse' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Earth System Model Version 1.5, released in 2019, includes the components: aerosol: CLASSIC (v1.0), atmos: HadGAM2 (r1.1, N96; 192 x 145 longitude/latitude; 38 levels; top level 39255 m), land: CABLE2.4, ocean: ACCESS-OM2 (MOM5, tripolar primarily...

CSIRO ACCESS-ESM1.5 model output prepared for CMIP6 CMIP esm-piControl

Tilo Ziehn, Matthew Chamberlain, Andrew Lenton, Rachel Law, Roger Bodman, Martin Dix, Yingping Wang, Peter Dobrohotoff, Jhan Srbinovsky, Lauren Stevens, Peter Vohralik, Chloe Mackallah, Arnold Sullivan, Siobhan O'Farrell & Kelsey Druken
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.CSIRO.ACCESS-ESM1-5.esm-piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Earth System Model Version 1.5, released in 2019, includes the components: aerosol: CLASSIC (v1.0), atmos: HadGAM2 (r1.1, N96; 192 x 145 longitude/latitude; 38 levels; top level 39255 m), land: CABLE2.4, ocean: ACCESS-OM2 (MOM5, tripolar primarily...

CSIRO-ARCCSS ACCESS-CM2 model output prepared for CMIP6 FAFMIP faf-all

Abhishek Savita, Simon Marsland, Martin Dix, Doahua Bi, Peter Dobrohotoff, Russell Fiedler, Chloe Mackallah, Arnold Sullivan, Fabio Boeira Dias, Catia Domingues, Nicholas Hannah, Aidan Heerdegen, Andrew Hogg & Kelsey Druken
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.FAFMIP.CSIRO-ARCCSS.ACCESS-CM2.faf-all' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Climate Model Version 2, released in 2019, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), land: CABLE2.5, ocean: ACCESS-OM2 (GFDL-MOM5, tripolar primarily 1deg; 360 x...

HAMMOZ-Consortium MPI-ESM1.2-HAM model output prepared for CMIP6 AerChemMIP ssp370SST

David Neubauer, Sylvaine Ferrachat, Colombe Siegenthaler-Le Drian, Jens Stoll, Doris Sylvia Folini, Ina Tegen, Karl-Hermann Wieners, Thorsten Mauritsen, Irene Stemmler, Stefan Barthel, Isabelle Bey, Nikos Daskalakis, Bernd Heinold, Harri Kokkola, Daniel Partridge, Sebastian Rast, Hauke Schmidt, Nick Schutgens, Tanja Stanelle, Philip Stier, Duncan Watson-Parris & Ulrike Lohmann
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.AerChemMIP.HAMMOZ-Consortium.MPI-ESM-1-2-HAM.ssp370SST' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named MPI-ESM1.2-HAM, released in 2017, includes the components: aerosol: HAM2.3, atmos: ECHAM6.3 (spectral T63; 192 x 96 longitude/latitude; 47 levels; top level 0.01 hPa), atmosChem: sulfur chemistry (unnamed), land: JSBACH 3.20, ocean: MPIOM1.63 (bipolar GR1.5, approximately 1.5deg; 256 x 220 longitude/latitude; 40 levels;...

HAMMOZ-Consortium MPI-ESM1.2-HAM model output prepared for CMIP6 AerChemMIP piClim-2xss

David Neubauer, Sylvaine Ferrachat, Colombe Siegenthaler-Le Drian, Jens Stoll, Doris Sylvia Folini, Ina Tegen, Karl-Hermann Wieners, Thorsten Mauritsen, Irene Stemmler, Stefan Barthel, Isabelle Bey, Nikos Daskalakis, Bernd Heinold, Harri Kokkola, Daniel Partridge, Sebastian Rast, Hauke Schmidt, Nick Schutgens, Tanja Stanelle, Philip Stier, Duncan Watson-Parris & Ulrike Lohmann
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.AerChemMIP.HAMMOZ-Consortium.MPI-ESM-1-2-HAM.piClim-2xss' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named MPI-ESM1.2-HAM, released in 2017, includes the components: aerosol: HAM2.3, atmos: ECHAM6.3 (spectral T63; 192 x 96 longitude/latitude; 47 levels; top level 0.01 hPa), atmosChem: sulfur chemistry (unnamed), land: JSBACH 3.20, ocean: MPIOM1.63 (bipolar GR1.5, approximately 1.5deg; 256 x 220 longitude/latitude; 40 levels;...

ECMWF ECMWF-IFS-LR model output prepared for CMIP6 HighResMIP spinup-1950

Christopher David Roberts, Retish Senan, Franco Molteni, Souhail Boussetta & Sarah Keeley
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.ECMWF.ECMWF-IFS-LR.spinup-1950' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named ECMWF-IFS-LR (50 km atmosphere and 100 km ocean), released in 2017, includes the components: atmos: IFS (IFS CY43R1, Tco199, cubic octahedral reduced Gaussian grid equivalent to 800 x 400 longitude/latitude; 91 levels; top level 0.01 hPa), land: HTESSEL (as implemented in IFS...

ECMWF ECMWF-IFS-MR model output prepared for CMIP6 HighResMIP hist-1950

Christopher David Roberts, Retish Senan, Franco Molteni, Souhail Boussetta & Sarah Keeley
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.ECMWF.ECMWF-IFS-MR.hist-1950' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named ECMWF-IFS-MR (50 km atmosphere and 25 km ocean), released in 2017, includes the components: atmos: IFS (IFS CY43R1, Tco199, cubic octahedral reduced Gaussian grid equivalent to 800 x 400 longitude/latitude; 91 levels; top level 0.01 hPa), land: HTESSEL (as implemented in IFS...

Registration Year

  • 2021
    253
  • 2020
    977
  • 2019
    1,304
  • 2018
    69
  • 2017
    21

Resource Types

  • Dataset
    2,624

Affiliations

  • Max-Planck-Institut fuer Meteorologie (MPI-M)
    145
  • Helmholtz-Zentrum Geesthacht, Zentrum für Material- und Küstenforschung GmbH (HZG)
    6