201 Works

Test data for uniaxial tensile on material P91 at 24 Celsius

Kolluri M Luzginova N &
In this IBIS experiment (under the framework of the materials domain DEMETRA in the European Transmutation research and development project EUROTRANS) ferritic-martensitic 9 Cr steel (T91), austenitic 316L stainless steel and their welds in direct contact with LBE have been irradiated for 250 full power days up at 300 oC to a dose level of 1.25-1.8 dpa, and at 500 oC to a dose level of 2.1- 2.7 dpa. The results from the uni-axial tensile...

Test data for uniaxial tensile on material T91 at 24 Celsius

&
In this IBIS experiment (under the framework of the materials domain DEMETRA in the European Transmutation research and development project EUROTRANS) ferritic-martensitic 9 Cr steel (T91), austenitic 316L stainless steel and their welds in direct contact with LBE have been irradiated for 250 full power days up at 300 oC to a dose level of 1.25-1.8 dpa, and at 500 oC to a dose level of 2.1- 2.7 dpa. The results from the uni-axial tensile...

Test data for uniaxial tensile on material AISI 316 L at 24 Celsius

Kolluri M Luzginova N &
In this IBIS experiment (under the framework of the materials domain DEMETRA in the European Transmutation research and development project EUROTRANS) ferritic-martensitic 9 Cr steel (T91), austenitic 316L stainless steel and their welds in direct contact with LBE have been irradiated for 250 full power days up at 300 oC to a dose level of 1.25-1.8 dpa, and at 500 oC to a dose level of 2.1- 2.7 dpa. The results from the uni-axial tensile...

Small punch tensile/fracture test data for P91 material and a displacement rate of .003 mm/s

& Institute For Energy EC-JRC Petten
The data relate to a thesis concerned with demonstrating the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch tensile/fracture test data for P91 material at -70 °C and a displacement rate of .003 mm/s

& Institute For Energy EC-JRC Petten
The data relate to a thesis concerned with demonstrating the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch tensile/fracture test data for P91 material at -130 °C and a displacement rate of .003 mm/s (repeat test)

& Institute For Energy EC-JRC Petten
The data relate to a thesis concerned with demonstrating the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch creep test data for P91 material at 600 °C and a load of 250 N

& Institute For Energy EC-JRC Petten
The main aim of the thesis is to demonstrate the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch creep test data for P91 material at 600 °C and a load of 280 N

& Institute For Energy EC-JRC Petten
The main aim of the thesis is to demonstrate the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch creep test data for P91 wm material at 600 °C and a load of 250 N

& Institute For Energy EC-JRC Petten
The main aim of the thesis is to demonstrate the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch creep test data for P91 material at 600 °C and a load of 240 N (repeat test)

& Institute For Energy EC-JRC Petten
The data relate to a thesis concerned with demonstrating the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Small punch creep test data for P91 haz_fg material at 600 °C and a load of 250 N

& Institute For Energy EC-JRC Petten
The data relate to a thesis concerned with demonstrating the suitability of Small Punch (SP) testing for lifetime prediction of metallic materials operating at high temperatures. The lack of standardisation of this technique and doubts about the correlation of the data with that obtained from conventional creep tests, supports the need to exploit the recently launched Code of Practice for Small Punch Testing (CEN/WS 21). The present work is specifically concerned with investigating the creep...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material IN 718 at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for uniaxial tensile on material HAYNES 282 sa ta at 21 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for uniaxial tensile on material HAYNES 282 sa ta at 21 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material A-286 ph sa at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material A-286 ph sa at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for high cycle fatigue on material A-286 ph sa at 20 Celsius

Burkhard Fischer Matthias Bruchhausen & Institute For Energy EC-JRC Petten
The FP7 project "In Space Propulsion 1" was set up to improve the fundamental knowledge and the techniques which are necessary to allow Europe to implement new ambitious space programs involving cryogenic propulsion. It concentrates on liquid oxygen, liquid hydrogen, and liquid methane propellants, and the anticipated progress will address - LOX methane combustion - heat and propellant management - materials tribology, compatibility, and hydrogen embrittlement. The data included here were generated in the part...

Test data for small punch creep on material 14 Cr 1 W ods at 650 Celsius and a load of 136 N

K Turba & Institute For Energy EC-JRC Petten
After analysing the running projects on different innovative reactor and transmutation systems and their related needs in terms of structural materials assessment, the focus of GETMAT has been put on F/M and ODS steels, as cross-cutting structural material choice for core and primary components. Moreover, the GETMAT project aims as well to streamline and integrate, in a comprehensive way, the R&D effort of the European materials laboratories for a wide-range study of the performance of...

Test data for low cycle fatigue - strain control on material 14 Cr 1 W ods at 750 Celsius

& Institute For Energy EC-JRC Petten
After analysing the running projects on different innovative reactor and transmutation systems and their related needs in terms of structural materials assessment, the focus of GETMAT has been put on F/M and ODS steels, as cross-cutting structural material choice for core and primary components. Moreover, the GETMAT project aims as well to streamline and integrate, in a comprehensive way, the R&D effort of the European materials laboratories for a wide-range study of the performance of...

Registration Year

  • 2013
    201

Resource Types

  • Dataset
    201