685 Works

Small punch tensile/fracture test data for 2.25 Cr 1Mo V mod material at 25 °C and a displacement rate of .003 mm/s (sixteenth repeat test)

& Institute For Energy EC-JRC Petten
Data collection created in the scope of a programme designed to evaluate the reliability of the Small Punch (SP) testing method as an alternative mechanical test technique for evaluation of the residual life and integrity assessment of components in ageing plants. Tests were performed on the low alloy - 2¼Cr 1Mo V modified ferritic steel, widely selected for construction of high temperature components in petrochemical plants. The technique was shown to facilitate determination of both...

Small punch tensile/fracture test data for S355J2+N n material at 24 °C and a displacement rate of .005 mm/s

&
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the performance of grade S355J2N structural steel.

Thermo-mechanical fatigue test data for IN 718 material for a temperature range of 316 to 677 °C and a mechanical strain range of 1 % (second repeat test)

FJ De Haan &
Data collection containing the results of the tests conducted by the European Commission JRC, under the frame of the Inter Laboratory Study (ILS) on Thermo-mechanical Fatigue (TMF). The primary purpose of this study was to provide a precision and bias statement to be included in the revision of ASTM E-2368, Standard Practice for Strain Controlled Thermo-Mechanical Fatigue Testing.

Small punch tensile/fracture test data for S355J2+N n material at 22 °C and a displacement rate of .005 mm/s

&
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the performance of grade S355J2N structural steel.

Small punch tensile/fracture test data for S355J2+N n material at -174 °C and a displacement rate of .005 mm/s

&
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the performance of grade S355J2N structural steel.

Small punch tensile/fracture test data for S355J2+N n material at -181 °C and a displacement rate of .005 mm/s (repeat test)

&
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the performance of grade S355J2N structural steel.

Small punch tensile/fracture test data for S355J2+N n material at -164 °C and a displacement rate of .005 mm/s

&
A data collection created at the JRC in the scope of a co-operation between TNO and JRC to determine the capacity of the small punch tensile/fracture testing procedure to qualify the performance of grade S355J2N structural steel.

Small punch test data for Gr. 91 steel

Matthias Bruchhausen &
In the framework of its institutional project on Gen IV nuclear reactors, the JRC-IET performs pre-normative materials qualification research within the work package PreMaQ. The activities focus on evaluation methods like ultrasonic fatigue, neutron diffraction, thermoelectric power measurements, x-ray tomography, small punch creep and fracture tests, and nano-indentation with the aim to establish or prepare international standards.The current data set belongs to a small punch tensile/fracture mechanics test on the ferritic/martensitic steel Grade 91.

Small punch tensile test data on Gr. 91 steel at room temperature and elevated temperature.

Matthias Bruchhausen &
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile strength and yield stress from small punch force-deflection curves.

Small punch test data for steel S355J2+N

Matthias Bruchhausen &
Small punch test data for steel S355J2+N from cryogenic to room temperature with punch diameters 2 mm and 2.5 mm.

Small punch tensile/fracture test data for 15-15 Ti ar cw material at 500 °C and a displacement rate of .005 mm/s (third nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti ar cw material at 550 °C and a displacement rate of .005 mm/s

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti ar cw material at 600 °C and a displacement rate of .005 mm/s (sixth nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti ar cw material at 700 °C and a displacement rate of .005 mm/s (third nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti ar cw material at 800 °C and a displacement rate of .005 mm/s (sixth nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti material at 20 °C and a displacement rate of .005 mm/s (second nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti material at 400 °C and a displacement rate of .005 mm/s

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti material at 500 °C and a displacement rate of .005 mm/s (second nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for 15-15 Ti material at 800 °C and a displacement rate of .005 mm/s

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch tensile/fracture test data for Zircaloy 4 material at 20 °C and a displacement rate of .005 mm/s (second nominally repeat test)

F De Haan, B Fischer, S Holmström &
Data created at the JRC in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Small punch creep test data for P91 ar material at 625 °C and a load of 420 N

SS Holmström &
Small punch creep data created for P91 by the JRC in the scope of its work in support of the development and qualification of the small punch creep test procedure and associated assessment methods.

Small punch tensile/fracture test data for P91 ar material at 22 °C and a displacement rate of .005 mm/s (sixth repeat test)

F De Haan &
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile strength and yield stress from small punch force-deflection curves.

Small punch tensile/fracture test data for P91 material at 24 °C and a displacement rate of .005 mm/s (second repeat test)

F De Haan &
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile strength and yield stress from small punch force-deflection curves.

Small punch tensile/fracture test data for P91 material at 300 °C and a displacement rate of .005 mm/s

F De Haan &
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile strength and yield stress from small punch force-deflection curves.

Small punch tensile/fracture test data for P91 material at 500 °C and a displacement rate of .005 mm/s

F De Haan &
Open access small punch data created by the European Commission JRC. The data is on P91 (Gr. 91) ferritic/martensitic steel for assessing the procedures to estimate the uniaxial tensile strength and yield stress from small punch force-deflection curves.

Registration Year

  • 2016
    685

Resource Types

  • Dataset
    685