492 Works

Youngs modulus test data for AISI 316 L material at 20 °C

& Institute For Energy EC-JRC Petten
In May 1985 a European programme on intercomparison of low cycle fatigue (LCF) testing was started under the auspices of the EEC Community Bureau of Reference (BCR). Subsequently, as a result of the Versailles Project on Advanced Materials and Standards (VAMAS), a wider international participation was sought. The objective of the programme was to establish a set of high temperature LCF data representative of accepted testing practice and, subsequently, to identify the significant aspects of...

Youngs modulus test data for NIMONIC 101 material at 20 °C

& Institute For Energy EC-JRC Petten
In May 1985 a European programme on intercomparison of low cycle fatigue (LCF) testing was started under the auspices of the EEC Community Bureau of Reference (BCR). Subsequently, as a result of the Versailles Project on Advanced Materials and Standards (VAMAS), a wider international participation was sought. The objective of the programme was to establish a set of high temperature LCF data representative of accepted testing practice and, subsequently, to identify the significant aspects of...

Small punch tensile/fracture test data for MA 956 material at 22 °C and a displacement rate of .005 mm/s

&
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties and the ductile to brittle transition temperature (DBTT) a series of tests were carried out at room and elevated temperatures.

Small punch tensile/fracture test data for MA 956 material at 81 °C and a displacement rate of .005 mm/s

&
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties and the ductile to brittle transition temperature (DBTT) a series of tests were carried out at room and elevated temperatures.

Small punch tensile/fracture test data for MA 956 material at 22 °C and a displacement rate of .005 mm/s (second repeat test)

&
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties and the ductile to brittle transition temperature (DBTT) a series of tests were carried out at room and elevated temperatures.

Small punch tensile/fracture test data for MA 956 material at 79 °C and a displacement rate of .005 mm/s

&
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties and the ductile to brittle transition temperature (DBTT) a series of tests were carried out at room and elevated temperatures.

Small punch tensile/fracture test data for AISI 316L ar material at 20 °C and a displacement rate of .00833333333333333 mm/s (second repeat test)

W De Weerd &
Small punch data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties a series of tests were carried out at room and elevated temperatures.

Small punch tensile/fracture test data for AISI 316L ar material at 300 °C and a displacement rate of .00833333333333333 mm/s (repeat test)

W De Weerd &
Small punch data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties a series of tests were carried out at room and elevated temperatures.

Uniaxial tensile test data for 15-15 Ti ar cw material at 23 °C (second nominally repeat test)

E. Altstadt M. Houska &
Data created at HZDR in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Uniaxial tensile test data for 15-15 Ti cw material at 21 °C

E. Altstadt M. Houska &
Data created at HZDR in the scope of the EERA JPNM pilot project TASTE to assess miniature testing techniques for fuel claddings.

Uniaxial creep test data for ALLOY 800HT material at 850 °C and a stress of 43 MPa

B Twaddle &
Uniaxial creep data for ALLOY 800HT material from tests performed at Babcock Energy Limited (now Doosan Babcock) in the first-phase Basic Research for Industrial Technologies in Europe (BRITE) P1209 project on lifetime prediction and extrapolation methodologies for computer aided assessment of component service behaviour under stress at high temperature.

Uniaxial tensile test data for Gr. 91 material at 300 °C (fifth repeat test)

F Di Gabriele &
Data created at CVR during the KAMILE project on kinetics and mechanisms of crack initiation in liquid metal embrittlement (LME), funded by the GACR Grant Agency of the Czech Republic (c.n. 16-15008S) for fundamental science (2016-2018). The project is focused on the study of crack initiation in heavy liquid metal (HLM) environments at 300°C, in terms of threshold stresses and mechanisms. The steels considered are the ferritic-martensitic T91, the austenitic 1.4970 (15-15Ti), and (to a...

Uniaxial tensile test data for Gr. 91 material at 300 °C (seventh repeat test)

F Di Gabriele &
Data created at CVR during the KAMILE project on kinetics and mechanisms of crack initiation in liquid metal embrittlement (LME), funded by the GACR Grant Agency of the Czech Republic (c.n. 16-15008S) for fundamental science (2016-2018). The project is focused on the study of crack initiation in heavy liquid metal (HLM) environments at 300°C, in terms of threshold stresses and mechanisms. The steels considered are the ferritic-martensitic T91, the austenitic 1.4970 (15-15Ti), and (to a...

Small punch tensile/fracture test data for P92 material at 22 °C and a displacement rate of .00833 mm/s (repeat test)

R Lacalle &
Content area for Inesco Ingenieros data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for P92 material at 22 °C and a displacement rate of .00833 mm/s (second repeat test)

R Lacalle &
Content area for Inesco Ingenieros data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for P92 material at 22 °C and a displacement rate of .00833 mm/s (sixth repeat test)

R Lacalle &
Content area for Inesco Ingenieros data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for P92 material at 22 °C and a displacement rate of .00833 mm/s (seventh repeat test)

R Lacalle &
Content area for Inesco Ingenieros data created in the scope of the small punch test standardization project.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 325 °C (second repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 325 °C (eighth repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 325 °C (twenty-first repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 100 °C (repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 200 °C (repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 200 °C (third repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 300 °C

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Low cycle fatigue - strain control test data for AISI 316 ar sa material at 300 °C (repeat test)

& Ltd. Mitsubishi Heavy Industries
Mitsubishi Heavy Industries data collection shared with the partners of the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment.

Registration Year

  • 2017
    492

Resource Types

  • Dataset
    492