185 Works

Catalog of SSRT data sets created at CVR during the KAMILE project on crack initiation in liquid metal embrittlement

F Di Gabriele &
Catalog of slow strain rate tensile (SSRT) data sets created at CVR during the KAMILE project on kinetics and mechanisms of crack initiation in liquid metal embrittlement (LME), funded by the GACR Grant Agency of the Czech Republic (c.n. 16-15008S) for fundamental science (2016-2018). The project is focused on the study of crack initiation in heavy liquid metal (HLM) environments at 300°C, in terms of threshold stresses and mechanisms. The steels considered are the ferritic-martensitic...

Uniaxial tensile test data for Gr. 91 material at 300 °C (twelfth repeat test)

F Di Gabriele &
Data created at CVR during the KAMILE project on kinetics and mechanisms of crack initiation in liquid metal embrittlement (LME), funded by the GACR Grant Agency of the Czech Republic (c.n. 16-15008S) for fundamental science (2016-2018). The project is focused on the study of crack initiation in heavy liquid metal (HLM) environments at 300°C, in terms of threshold stresses and mechanisms. The steels considered are the ferritic-martensitic T91, the austenitic 1.4970 (15-15Ti), and (to a...

Small punch creep test data for AISI 316L ar material at 650 °C and a load of 400 N

&
Small punch tensile and creep data obtained in a round robin exercise for the elaboration of an EN standard on small punch testing. Several test materials have been tested. For estimating the tensile properties a series of tests were carried out at room and elevated temperatures. Further tests were performed at varying temperatures between 77K and room temperature to determine the ductile to brittle transition temperature (DBTT). Creep tests have also been carried out.

Micropillar Compression test data for AISI 316L material at 20 °C (repeat test)

&
Micro pillar compression data created at the JRC during the Horizon 2020 SOTERIA project on the safe long-term operation of light water reactors based on improved understanding of radiation effects in nuclear structural materials. For more information, see http://cordis.europa.eu/project/rcn/196910_en.html. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 661913.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 5.00923 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 5.01661 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 5.01670 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10.01729 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10.03096 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10.01777 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50.10360 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50.11849 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50.10813 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50.10453 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 50.09812 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 100.10542 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 100.12003 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 1.00509 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 1.00436 mN (first nominally repeat test)

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 1.00351 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10.02380 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 10.00998 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 100.11166 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 100.13376 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Small Punch tests on 24%CW 1515Ti (curved samples) RT-800°C.

S Holmström &
SP tests with curved tube samples on 24% Cold Worked 1515Ti cladding in the temperature range RT-800°C. The tests are part of the JRC contribution to the EERA JPNM pilot project TASTE:

Registration Year

  • 2018
    185

Resource Types

  • Dataset
    185