185 Works

Low cycle fatigue - strain control test data for AISI 304L ar material at 295 °C and nominal strain range of .6 %

P Spätig, H-P Seifert, R Schwenold &
INCEFA+ project

Catalog of JRC Open Access uniaxial creep and small punch test data for the same P91 material used in the INTEGRITY FP5 Growth project

T Austin &
The data in this catalog were created during two consecutive PhDs investigating the viability of the small punch test to determine the creep, tensile, and fracture properties of P91 steel. The work was undertaken in support of the development and validation of the Code of Practice for Small Punch Testing delivered by CEN Workshop 21.

Uniaxial tensile test data for P92 nt material at 300 °C

F De Haan, S Holmstrom, M Bruchhausen &
Small punch and uniaxial tensile tests have been performed to support the methodologies for estimating the materials properties by small punch. The results obtained are for the elaboration of an EN standard on small punch testing.

Low cycle fatigue - strain control test data for AISI 304L ar material at 300 °C and nominal strain range of 1.2 % (eighteenth nominally repeat test)

&
Data created at INESCO Ingenieros during the Horizon 2020 INCEFA+ project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 662320.

Nanoindentation (single cycle) test data for Gr. 91 material at 23 °C and maximum indenter force of 1 mN

A Ruiz &
Data created at the European Commission JRC in the scope of the EERA JPNM pilot project NINA on the topic of nanoindentation for nuclear applications.

Small punch tensile/fracture test data for AISI 316L ar material at 300 °C and a displacement rate of .00833 mm/s (repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for AISI 316L ar material at 300 °C and a displacement rate of .00833 mm/s (third repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for AISI 316L ar material at 300 °C and a displacement rate of .00833 mm/s (fifth repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for AISI 316L ar material at 300 °C and a displacement rate of .00833 mm/s (sixth repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for MA 956 material at 24 °C and a displacement rate of .00833 mm/s

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for MA 956 material at 24 °C and a displacement rate of .00833 mm/s (repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for MA 956 material at 24 °C and a displacement rate of .00833 mm/s (third repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for MA 956 material at 24 °C and a displacement rate of .00833 mm/s (fourth repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Low cycle fatigue - strain control test data for AISI 304L ar material at 300 °C and nominal strain range of 1.2 % (seventh nominally repeat test)

J-C LE ROUX &
Data created at EDF R&D MMC during the Horizon 2020 INCEFA+ project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 662320.

Low cycle fatigue - strain control test data for AISI 304L ar material at 300.57 °C and nominal strain range of 1.2 %

A McLennan &
Data created at Jacobs during the Horizon 2020 INCEFA+ project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 662320.

Low cycle fatigue - strain control test data for AISI 304L ar material at 301.4 °C and nominal strain range of 1.2 %

A McLennan &
Data created at Jacobs during the Horizon 2020 INCEFA+ project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 662320.

Low cycle fatigue - strain control test data for AISI 304L ar material at 295 °C and nominal strain range of 1.2 % (first nominally repeat test)

P Spätig, H-P Seifert, R Schwenold &
INCEFA+ project

Low cycle fatigue - strain control test data for AISI 304L ar material at 300 °C and nominal strain range of 1.2 % (thirteenth nominally repeat test)

P Spätig, H-P Seifert, R Schwenold &
INCEFA+ project

Low cycle fatigue - strain control test data for AISI 304L ar material at 300 °C and nominal strain range of 1.2 % (forty-seventh nominally repeat test)

L De Baglion, L Doremus &
Data created by AREVA NP SAS during the Horizon 2020 INCEFA-PLUS project on increasing safety in NPPs by covering gaps in environmental fatigue assessment. This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 662320.

Uniaxial tensile test data for AISI 316L in PWR conditions at 340°C

&
The data sets of this catalog is data from uniaxial tensile tests on tapered specimens made of duplex steel AISL 316L in PWR conditions at 340°C. The tests were performed within the in-kind project MICRIN (MIitigation of CRack Initiation), which ran under the umbrella of NUGENIA Technical Area 4.

Small punch tensile/fracture test data for AISI 316L ar material at 24 °C and a displacement rate of .00833 mm/s (fifth repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for AISI 316L ar material at 24 °C and a displacement rate of .00833 mm/s (seventh repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Small punch tensile/fracture test data for MA 956 material at 24 °C and a displacement rate of .00833 mm/s (fifth repeat test)

Petra Petelová & A. S. ÚJV Řež
Content area for UJV Rez, a.s. data created in the scope of the small punch test standardization project.

Registration Year

  • 2018
    185

Resource Types

  • Dataset
    185