154 Works

Research on Influence of TiSi(N) Reflective Coating Thermal Resistance on Energy Absorption of Fireproof Textile Coupled with Auxetic Fabric

Danuta MIEDZIŃSKA, Michał STANKIEWICZ, Roman GIELETA & Konstanty MARSZAŁEK
The research presented in the paper deals with the improvement of firemen protective clothing. The proposed modification of the special textile PROTON is based on the application of TiSi(N) nanocomposite reflective layer, which improves the thermal resistance of the coated material. The second improvement deals with the implementation of auxetic textile into the protective clothing structure. Such material is characterized with the very good blast wave resistance. In the paper both phenomena were studied. The...

Performance Evaluation and Frequency Response Analysis of a Two Stage Two Spool Electrohydraulic Servovalve with a Linearized Model

Nitesh MONDAL & Biswanath DATTA
This article focuses on the performance study and frequency response analysis with the state space model of a linearized two stage two spool non-conventional electrohydraulic servovalve from a set of nonlinear state equations. The performance of this valve depends on many valve geometries and fluid parameters. This non-conventional electrohydraulic servovalve is controlled by a pressure controlled pilot, which generates a differential pressure between the upper and lower chambers of two spools. This differential pressure acts...

Euler–Bernoulli type beam theory for elastic bodies with nonlinear response in the small strain range

A. JANEČKA, V. PRŮŠA & K.R. RAJAGOPAL

A circular inclusion with inhomogeneous sliding imperfec tinterface in harmonic materials

D.R. MCARTHUR & L.J. SUDAK

Random composite: stirred or shaken?

S. GLUZMAN, V. MITYUSHEV, W. NAWALANIEC & G. SOKAL

Nano-inclusion with uniform internal strain induced by a screw dislocation

M. DAI, P. SCHIAVONE & C.-F. GAO

Elastic properties of a unidirectional composite reinforced with hexagonal array of fibers

T. CZAPLINSKI, P. DRYGAŚ, S. GLUZMAN, V. MITYUSHEV, W. NAWALANIEC & G. ZIETEK

Effect of material composition on bending analysis of FG plates via a two-variable refined hyperbolic theory

M. BOUAZZA, A.M. ZENKOUR & N. BENSEDDIQ

Acceleration feature points of unsteady shear flows

J. KASTEN, J. REININGHAUS, I. HOTZ, H.-C. HEGE, B. R. NOACK, G. DAVILLER & M. MORZYŃSKI

Simulation of dynamic phenomena in a high pressure variable displacement axial piston hydraulic pump

Tomasz ZAWISTOWSKI & Michał KLEIBER

Virtual Additive Manufacturing Based on Semicrystalline Polymer Polyetheretherketone (PEEK)

Paweł BAJERSKI, Ryszard B. PECHERSKI & Damian CHUDY
Virtual additive manufacturing (AM) is one of the new directions of research that is necessary to improve AM technology. Abaqus/SIMULIA software allows to simulate the whole process using user subroutines to expand solver capabilities. Two of the most important subroutines are UepActivationVol and UMATHT. The UepActivationVol is related to an activation of elements in accordance with the defined path of the process. The second one the UMATHT is used to implement and combine thermal and...

Numerical simulation of random fields using correlated random vector and the Karhunen-Loève expansion

Mariusz POŃSKI & Iwona POKORSKA

Heuristics applying stochastic information as tools for thermoacoustic standing-wave engine optimization

Iwona NOWAK

Crystallization Kinetics of Polyamide 2200 in the Modelling of Additive Manufacturing Processes by FE Analyses

Paweł BAJERSKI, Ryszard B. PĘCHERSKI, Damian CHUDY & Leszek JARECKI
The thermoplastic polymers present amorphous or semi-crystalline structures which are very important factors in describing volumetric shrinkage. The thermoplastic materials are commonly used for production of daily life products, industrial or as the prototypes. Different techniques of manufacturing polymer structures are considered like: injection molding, extrusion, milling, additive manufacturing (AM). AM is a very fast developing field in the manufacturing and research. Unfortunately, components or prototypes made using the thermoplastic semi-crystalline materials in 3D techniques...

The Impact of Temperature Oscillations and Heat Transfer Conditions in Thick-Walled Elbows and Tubes on the Local Stress-Strain Behaviour During the Fast Start-Up of Power Boilers

Jerzy OKRAJNI & Krzysztof WACŁAWIAK
The paper presents results of tests designed for predicting the behaviour of components subjected to variable temperature and mechanical loading conditions. Elbows and tubes, as examples of components widely used in power plant pipelines, have been examined. This analysis includes a description of model characteristics, the operating parameters of devices under industrial conditions, and the results of computational modelling (FEM).

Spectral Quasilinearization Method for Solution of Convective Heating Condition

Wubshet IBRAHIM
This article aims to implement the spectral quasilinearization method to examine the impact of a second-order slip flow and convective heating on boundary layer flow and heat transfer of a nanofluid over an extensible surface. The mathematical modeling of the flow problem is obtained by taking into consideration the weight of leading parameters. Similarity conversions are employed in converting the leading partial differential equations to non-linear high-order ordinary differential equations. These equations were numerically computed...

Analysis and Optimization of Radiant Cooling Panel with Wave-Type Embedded Pipes

Ramprasad PRASANNA, Prakash MOORTHY, Aravind KRISHNAN & Venkatesh BALAKRISHNAN
In this study, the radiant cooling panel with wave-type pattern pipes is analyzed and optimized through Taguchi’s design of experiments methods and grey relation method for better performance. Radiant cooling panel’s bottom surface temperature and temperature non-uniformity index are considered as the quality objective functions. Control parameters such as pipe length, the spacing between the pipes, radiant panel thickness, pipe bent radius, pipe diameter, insulation layer thickness, pipe material, panel material, insulation material, and mass...

Development of Non-Contact Fatigue Crack Propagation Monitoring Method Using Air-Coupled Acoustic Emission System

Takuma MATSUO & Daisuke HATANAKA
A monitoring system for fatigue crack propagation was developed using a non-contact acoustic emission (AE) monitoring system. The AE signals generated during the plane bending fatigue test were first monitored. The AE generation rate increased after approximately 0.5 of the fatigue life ratio. The maximum amplitude of the AE signals increased with a tendency similar to that of the crack propagation. The sensor sensitivities for the flat and arced surfaces were then compared. The sensitivity...

Simulations of Concrete Response to Impact Loading Using Two Regularized Models

Adam WOSATKO, Andrzej WINNICKI & Jerzy PAMIN

Maximisation of buckling resistance in structural members made of circular hollow sections

Ryszard WALENTYŃSKI & Monika SIWEK

Bending of Beams with Consideration of a Seventh-Order Shear Deformation Theory

Krzysztof MAGNUCKI, Włodzimierz STAWECKI & Ewa MAGNUCKA-BLANDZI
The subject of the paper is a simply- supported prismatic beam with bisymmetrical crosssections under non-uniformly distributed load. The shapes of the cross-sections and the nonuniformly distributed load are described analytically. The individual seventh-order shear deformation theory-hypothesis of the planar beam cross-sections is assumed. Based on the principle of stationary potential energy two differential equations of equilibrium are obtained. The system of the equations is analytically solved, and the shear and deflection coefficients of the...

Registration Year

  • 2020
    17
  • 2019
    113
  • 2018
    24

Resource Types

  • Data Paper
    154

Affiliations

  • Poznań University of Technology
    6
  • Tabor (Poland)
    4
  • Phetchabun Rajabhat University
    2
  • AGH University of Science and Technology
    2
  • Cracow University of Technology
    2
  • Dorodnitsyn Computing Centre
    1
  • China University of Mining and Technology
    1
  • Hubei University of Arts and Science
    1
  • Lublin University of Technology
    1
  • Przemysłowy Instytut Motoryzacji
    1