4,274 Works

CCSRNIES_SRES_A1T_VGRD500

Toru Nozawa
Project: IPCC Data Distribution Centre : Third Assessment Report data sets The Intergovernmental Panel on Climate Change (IPCC) has been established by WMO und UNEP to assess scientific, technical and socio-economic information, relevant for the understanding of climate change, its potential impacts and option for adaption and migration. Projection of future trends for a number of key variables are provided through this section of the DDC (http://www.mad.zmaw.de/IPCC_DDC/html/ddc_gcmdata.html). This information contained in either IS92 emission scenarios...

NOAA-GFDL GFDL-ESM4 model output prepared for CMIP6 CMIP piControl

John P. Krasting, Jasmin G John, Chris Blanton, Colleen McHugh, Serguei Nikonov, Aparna Radhakrishnan, Kristopher Rand, Niki T. Zadeh, V Balaji, Jeff Durachta, Christopher Dupuis, Raymond Menzel, Thomas Robinson, Seth Underwood, Hans Vahlenkamp, Krista A. Dunne, Paul PG Gauthier, Paul Ginoux, Stephen M. Griffies, Robert Hallberg, Matthew Harrison, William Hurlin, Sergey Malyshev, Vaishali Naik, Fabien Paulot … & Ming Zhao
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NOAA-GFDL.GFDL-ESM4.piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named GFDL-ESM4, released in 2018, includes the components: aerosol: interactive, atmos: GFDL-AM4.1 (Cubed-sphere (c96) - 1 degree nominal horizontal resolution; 360 x 180 longitude/latitude; 49 levels; top level 1 Pa), atmosChem: GFDL-ATMCHEM4.1 (full atmospheric chemistry), land: GFDL-LM4.1, landIce: GFDL-LM4.1, ocean: GFDL-OM4p5 (GFDL-MOM6, tripolar...

RTE-RRTMGP-Consortium RTE+RRTMGP (2018-12-04full-resolution) model output prepared for CMIP6 RFMIP rad-irf

Robert Pincus
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.RFMIP.RTE-RRTMGP-Consortium.RTE-RRTMGP-181204.rad-irf' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model Radiative Transfer for Energetics using RRTM for GCM applications - Parallel (2018-12-04 full-resolution), released in 2019, was run by the AER (Atmospheric and Environmental Research, Lexington, MA 02421, USA); UColorado (University of Colorado, Boulder, CO 80309, USA). Mailing address: AER c/o Eli Mlawer, 131 Hartwell Avenue, Lexington,...

NIWA UKESM1.0-LL model output prepared for CMIP6 AerChemMIP piClim-HC

Mohit Dalvi, Luke Abraham, Alex Archibald, Gerd Folberth, Paul Griffiths, Ben Johnson, James Keeble, Olaf Morgenstern, Jane Mulcahy, Mark Richardson, Eddy Robertson, Sungbo Shim, João Teixeira, Steven Turnock, Jonny Williams & Guang Zeng
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.AerChemMIP.NIWA.UKESM1-0-LL.piClim-HC' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named UKESM1.0-N96ORCA1, released in 2018, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), atmosChem: UKCA-StratTrop, land: JULES-ES-1.0, ocean: NEMO-HadGEM3-GO6.0 (eORCA1 tripolar primarily 1 deg with meridional refinement down to 1/3 degree in the...

UHH ARTS2.3 model output prepared for CMIP6 RFMIP rad-irf

Manfred Brath
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.RFMIP.UHH.ARTS-2-3.rad-irf' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model ARTS 2.3 (Current development version of the Atmospheric Radiative Transfer Simulator), released in 2015, was run by the Universitat Hamburg, Hamburg 20148, Germany (UHH). Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue:...

RTE-RRTMGP-Consortium RTE+RRTMGP (2018-12-04full-resolution) model output prepared for CMIP6 RFMIP

Robert Pincus
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.RFMIP.RTE-RRTMGP-Consortium.RTE-RRTMGP-181204' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model Radiative Transfer for Energetics using RRTM for GCM applications - Parallel (2018-12-04 full-resolution), released in 2019, was run by the AER (Atmospheric and Environmental Research, Lexington, MA 02421, USA); UColorado (University of Colorado, Boulder, CO 80309, USA). Mailing address: AER c/o Eli Mlawer, 131 Hartwell Avenue, Lexington,...

MRI MRI-ESM2.0 model output prepared for CMIP6 PMIP past1000

Seiji Yukimoto, Tsuyoshi Koshiro, Hideaki Kawai, Naga Oshima, Kohei Yoshida, Shogo Urakawa, Hiroyuki Tsujino, Makoto Deushi, Taichu Tanaka, Masahiro Hosaka, Hiromasa Yoshimura, Eiki Shindo, Ryo Mizuta, Masayoshi Ishii, Atsushi Obata & Yukimasa Adachi
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.PMIP.MRI.MRI-ESM2-0.past1000' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named MRI-ESM2.0, released in 2017, includes the components: aerosol: MASINGAR mk2r4 (TL95; 192 x 96 longitude/latitude; 80 levels; top level 0.01 hPa), atmos: MRI-AGCM3.5 (TL159; 320 x 160 longitude/latitude; 80 levels; top level 0.01 hPa), atmosChem: MRI-CCM2.1 (T42; 128 x 64 longitude/latitude; 80...

NERC HadGEM3-GC31-HM model output prepared for CMIP6 HighResMIP hist-1950

Reinhard Schiemann, Pier Luigi Vidale, Ros Hatcher & Malcolm Roberts
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.NERC.HadGEM3-GC31-HM.hist-1950' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named HadGEM3-GC3.1-N512ORCA025, released in 2016, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N512; 1024 x 768 longitude/latitude; 85 levels; top level 85 km), land: JULES-HadGEM3-GL7.1, ocean: NEMO-HadGEM3-GO6.0 (eORCA025 tripolar primarily 0.25 deg; 1440 x 1205 longitude/latitude; 75 levels; top grid cell 0-1 m),...

NERC HadGEM3-GC31-HM model output prepared for CMIP6 HighResMIP highres-future

Reinhard Schiemann, Pier Luigi Vidale, Ros Hatcher & Malcolm Roberts
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.NERC.HadGEM3-GC31-HM.highres-future' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named HadGEM3-GC3.1-N512ORCA025, released in 2016, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N512; 1024 x 768 longitude/latitude; 85 levels; top level 85 km), land: JULES-HadGEM3-GL7.1, ocean: NEMO-HadGEM3-GO6.0 (eORCA025 tripolar primarily 0.25 deg; 1440 x 1205 longitude/latitude; 75 levels; top grid cell 0-1 m),...

CMCC CMCC-ESM2-SR5 model output prepared for CMIP6 LUMIP land-cCO2

Daniele Peano & Tomas Lovato
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.LUMIP.CMCC.CMCC-ESM2-SR5.land-cCO2' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CMCC-ESM2-SR5, released in 2017, includes the components: aerosol: MAM3, atmos: CAM5.3 (1deg; 288 x 192 longitude/latitude; 30 levels; top at ~2 hPa), land: CLM4.5 (BGC mode), ocean: NEMO3.6 (ORCA1 tripolar primarly 1 deg lat/lon with meridional refinement down to 1/3 degree in...

NERC HadGEM3-GC31-HM model output prepared for CMIP6 HighResMIP

Reinhard Schiemann, Pier Luigi Vidale, Ros Hatcher & Malcolm Roberts
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.HighResMIP.NERC.HadGEM3-GC31-HM' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named HadGEM3-GC3.1-N512ORCA025, released in 2016, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N512; 1024 x 768 longitude/latitude; 85 levels; top level 85 km), land: JULES-HadGEM3-GL7.1, ocean: NEMO-HadGEM3-GO6.0 (eORCA025 tripolar primarily 0.25 deg; 1440 x 1205 longitude/latitude; 75 levels; top grid cell 0-1 m),...

NIWA UKESM1.0-LL model output prepared for CMIP6 AerChemMIP

Mohit Dalvi, Luke Abraham, Alex Archibald, Gerd Folberth, Paul Griffiths, Ben Johnson, James Keeble, Olaf Morgenstern, Jane Mulcahy, Mark Richardson, Eddy Robertson, Sungbo Shim, João Teixeira, Steven Turnock, Jonny Williams & Guang Zeng
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.AerChemMIP.NIWA.UKESM1-0-LL' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named UKESM1.0-N96ORCA1, released in 2018, includes the components: aerosol: UKCA-GLOMAP-mode, atmos: MetUM-HadGEM3-GA7.1 (N96; 192 x 144 longitude/latitude; 85 levels; top level 85 km), atmosChem: UKCA-StratTrop, land: JULES-ES-1.0, ocean: NEMO-HadGEM3-GO6.0 (eORCA1 tripolar primarily 1 deg with meridional refinement down to 1/3 degree in the...

UHH ARTS2.3 model output prepared for CMIP6 RFMIP

Manfred Brath
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.RFMIP.UHH.ARTS-2-3' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model ARTS 2.3 (Current development version of the Atmospheric Radiative Transfer Simulator), released in 2015, was run by the Universitat Hamburg, Hamburg 20148, Germany (UHH). Project: These data have been generated as part of the internationally-coordinated Coupled Model Intercomparison Project Phase 6 (CMIP6; see also GMD Special Issue:...

input4MIPs.CMIP6.RFMIP.MPI-M

Bjorn Stevens, Stephanie Fiedler, Stefan Kinne, Karsten Peters, Sebastian Rast, Jobst Müsse, Steven Smith & Thorsten Mauritsen
CMIP6 Forcing Datasets (input4MIPs): These data includes all datasets published for 'input4MIPs.CMIP6.RFMIP.MPI-M' according to the Data Reference Syntax defined as 'activity_id.mip_era.target_mip.institution_id.source_id.realm.frequency.variable_id.grid_label'. The model MPI-M-MACv2 (MPI-M-MACv2) was run by the MPI-M (MPI-M) in native nominal resolutions: unknown. Project: The forcing datasets (and boundary conditions) needed for CMIP6 experiments are being prepared by a number of different experts. Initially many of these datasets may only be available from those experts, but over time as part of the...

NCAR CESM2 model output prepared for CMIP6 CMIP piControl

Gokhan Danabasoglu, David Lawrence, Keith Lindsay, William Lipscomb & Gary Strand
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NCAR.CESM2.piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CESM2, released in 2018, includes the components: aerosol: MAM4 (same grid as atmos), atmos: CAM6 (0.9x1.25 finite volume grid; 288 x 192 longitude/latitude; 32 levels; top level 2.25 mb), atmosChem: MAM4 (same grid as atmos), land: CLM5 (same grid as atmos), landIce:...

NCAR CESM2 model output prepared for CMIP6 CMIP amip

Gokhan Danabasoglu
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NCAR.CESM2.amip' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CESM2, released in 2018, includes the components: aerosol: MAM4 (same grid as atmos), atmos: CAM6 (0.9x1.25 finite volume grid; 288 x 192 longitude/latitude; 32 levels; top level 2.25 mb), atmosChem: MAM4 (same grid as atmos), land: CLM5 (same grid as atmos), landIce:...

NCAR CESM2 model output prepared for CMIP6 CMIP historical

Gokhan Danabasoglu
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NCAR.CESM2.historical' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CESM2, released in 2018, includes the components: aerosol: MAM4 (same grid as atmos), atmos: CAM6 (0.9x1.25 finite volume grid; 288 x 192 longitude/latitude; 32 levels; top level 2.25 mb), atmosChem: MAM4 (same grid as atmos), land: CLM5 (same grid as atmos), landIce:...

NCAR CESM2 model output prepared for CMIP6 CMIP

Gokhan Danabasoglu
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.NCAR.CESM2' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named CESM2, released in 2018, includes the components: aerosol: MAM4 (same grid as atmos), atmos: CAM6 (0.9x1.25 finite volume grid; 288 x 192 longitude/latitude; 32 levels; top level 2.25 mb), atmosChem: MAM4 (same grid as atmos), land: CLM5 (same grid as atmos), landIce:...

SNU SAM0-UNICON model output prepared for CMIP6 CMIP

Sungsu Park & Jihoon Shin
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.SNU.SAM0-UNICON' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named SAM0-UNICON (SNU Atmosphere Model version 0 with Unified Convection Scheme), released in 2017, includes the components: aerosol: MAM3, atmos: CAM5.3 with UNICON (1deg; 288 x 192 longitude/latitude; 30 levels; top level ~2 hPa), land: CLM4.0, ocean: POP2 (Displaced Pole; 320 x 384...

CCMI nitrogen surface fluxes in support of CMIP6 - version 2.0

Michaela Hegglin, Douglas Kinnison & Jean-Francois Lamarque
CMIP6 Forcing Datasets (input4MIPs): These data includes all datasets published for 'input4MIPs.CMIP6.CMIP.NCAR.NCAR-CCMI-2-0' according to the Data Reference Syntax defined as 'activity_id.mip_era.target_mip.institution_id.source_id.realm.frequency.variable_id.grid_label'. The model NCAR-CCMI-2-0 (NCAR-CCMI-2-0) was run by the NCAR (NCAR) in native nominal resolutions: unknown. Project: The forcing datasets (and boundary conditions) needed for CMIP6 experiments are being prepared by a number of different experts. Initially many of these datasets may only be available from those experts, but over time as part of the...

CSIRO ACCESS-ESM1.5 model output prepared for CMIP6 CMIP esm-piControl

Tilo Ziehn, Matthew Chamberlain, Andrew Lenton, Rachel Law, Roger Bodman, Martin Dix, Yingping Wang, Peter Dobrohotoff, Jhan Srbinovsky, Lauren Stevens, Peter Vohralik, Chloe Mackallah, Arnold Sullivan, Siobhan O'Farrell & Kelsey Druken
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.CSIRO.ACCESS-ESM1-5.esm-piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Earth System Model Version 1.5, released in 2019, includes the components: aerosol: CLASSIC (v1.0), atmos: HadGAM2 (r1.1, N96; 192 x 145 longitude/latitude; 38 levels; top level 39255 m), land: CABLE2.4, ocean: ACCESS-OM2 (MOM5, tripolar primarily...

CSIRO ACCESS-ESM1.5 model output prepared for CMIP6 CMIP piControl

Tilo Ziehn, Matthew Chamberlain, Andrew Lenton, Rachel Law, Roger Bodman, Martin Dix, Yingping Wang, Peter Dobrohotoff, Jhan Srbinovsky, Lauren Stevens, Peter Vohralik, Chloe Mackallah, Arnold Sullivan, Siobhan O'Farrell & Kelsey Druken
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.CMIP.CSIRO.ACCESS-ESM1-5.piControl' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named Australian Community Climate and Earth System Simulator Earth System Model Version 1.5, released in 2019, includes the components: aerosol: CLASSIC (v1.0), atmos: HadGAM2 (r1.1, N96; 192 x 145 longitude/latitude; 38 levels; top level 39255 m), land: CABLE2.4, ocean: ACCESS-OM2 (MOM5, tripolar primarily...

CAS FGOALS-g3 model output prepared for CMIP6 FAFMIP faf-water

Pengfei Lin
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.FAFMIP.CAS.FGOALS-g3.faf-water' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named FGOALS-g3, released in 2017, includes the components: atmos: GAMIL3 (180 x 80 longitude/latitude; 26 levels; top level 2.19hPa), land: CAS-LSM, ocean: LICOM3.0 (LICOM3.0, tripolar primarily 1deg; 360 x 218 longitude/latitude; 30 levels; top grid cell 0-10 m), seaIce: CICE4.0. The model was...

CAS FGOALS-g3 model output prepared for CMIP6 FAFMIP faf-stress

Pengfei Lin
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.FAFMIP.CAS.FGOALS-g3.faf-stress' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named FGOALS-g3, released in 2017, includes the components: atmos: GAMIL3 (180 x 80 longitude/latitude; 26 levels; top level 2.19hPa), land: CAS-LSM, ocean: LICOM3.0 (LICOM3.0, tripolar primarily 1deg; 360 x 218 longitude/latitude; 30 levels; top grid cell 0-10 m), seaIce: CICE4.0. The model was...

CAS FGOALS-g3 model output prepared for CMIP6 FAFMIP faf-passiveheat

Pengfei Lin
Coupled Model Intercomparison Project Phase 6 (CMIP6) data sets: These data includes all datasets published for 'CMIP6.FAFMIP.CAS.FGOALS-g3.faf-passiveheat' according to the Data Reference Syntax defined as 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The model used in climate research named FGOALS-g3, released in 2017, includes the components: atmos: GAMIL3 (180 x 80 longitude/latitude; 26 levels; top level 2.19hPa), land: CAS-LSM, ocean: LICOM3.0 (LICOM3.0, tripolar primarily 1deg; 360 x 218 longitude/latitude; 30 levels; top grid cell 0-10 m), seaIce: CICE4.0. The model was...

Registration Year

  • 2004
    12
  • 2005
    1,680
  • 2006
    79
  • 2007
    4
  • 2008
    5
  • 2009
    70
  • 2010
    4
  • 2011
    23
  • 2012
    152
  • 2013
    77
  • 2014
    210
  • 2015
    258
  • 2016
    141
  • 2017
    54
  • 2018
    91
  • 2019
    1,328
  • 2020
    86

Resource Types

  • Dataset
    4,247
  • Text
    27

Affiliations

  • Max Planck Institute for Meteorology
    61
  • German Climate Computing Centre
    2