Residential gardens are a valuable habitat for insect pollinators worldwide, but differences in individual gardening practices substantially affect their floral composition. It is important to understand how the floral resource supply of gardens varies in both space and time so we can develop evidence-based management recommendations to support pollinator conservation in towns and cities. We surveyed 59 residential gardens in the city of Bristol, UK, at monthly intervals from March to October. For each of...

Set of data was obtained for various NH3/H2 blends using an industrial scale swirl burner with a swirl no, Sg = 1.05. Exhaust emissions was measured by a bespoke state-of-art Quantum Cascade Analyser (CT5100) for various blends for a wide range of equivalence ratios (0.55 - 1.30). Emissions data (NO, NO2, N2O, NH3) at 8 kW thermal power are provided in the 1st four sheets,respectively, titled '8 kW_NO', '8 kW_NO2', '8 kW_N2O' and '8 kW_NH3'....

Cyclic voltammetry data is presented in Origin. X-axis = volts (against ferrocene redox couple); y-axis = Current density. Luminescence (emission) data is presented in Origin. X-axis = time; y-axis = emission intensity (arbitrary units). Excitation wavelengths for all datasets are listed in the main text. UV-vis (absorption) data is presented in Origin. X-axis = wavelength; y-axis = extinction coefficient. EPR data and simulations are presented in Origin. X-axis = magnetic field; y-axis = intensity (arbitrary...

Additional file 1. Gram-negative Cumulative Antibiogram Raw Data. Total number of Gram-negative isolates tested against each antibiotic to produce cumulative antibiogram percentage susceptibilities.

Additional file 2. Gram-positive Cumulative Antibiogram Raw Data. Total number of Gram-positive isolates tested against each antibiotic to produce cumulative antibiogram percentage susceptibilities.

Additional file 4. Gram-negative multidrug-resistant isolates raw data. Total number of Gram-negative isolates classified as multidrug-resistant together with the number of classes of antibiotics they were tested against and zone diameters against antibiotics tested.

Additional file 5. Inpatient and outpatient raw data for Chi-square analysis. Raw inpatient and outpatient data used in E. coli Chi-square statistical analysis against amikacin, ceftriaxone, cefotaxime, and ciprofloxacin.

Additional file 5. Inpatient and outpatient raw data for Chi-square analysis. Raw inpatient and outpatient data used in E. coli Chi-square statistical analysis against amikacin, ceftriaxone, cefotaxime, and ciprofloxacin.

Set of data was obtained for 70/30(vol.%) NH3/H2 blend using an industrial scale swirl burner with a swirl no, Sg = 1.05. Exhaust emissions was measured by a bespoke state-of-art Quantum Cascade Analyser (CT5100) for a wide range of equivalence ratios (0.55 - 1.30). Emissions data (NO, NO2, N2O, NH3) at 8 kW thermal power are provided in the 1st two sheets,respectively, titled 'Emissions Data_WET' and 'Emissions Data_15% O2, DRY'. These data sheets also contain...

The data set consists of BET surface area data, zeta potential data and retention data. BET surface area data are in text format and it gives all the relevant details about the experiment. The zeta data is split in folders. The xlx/csv files give the final result of ph vs zeta. the subfolders have xlx/csv files showing pressure vs streaming voltage for each measurment point. the slope from each of the curve is used to...

In order to quantify and verify the quality of the growth of the Type-II superlattice X-ray diffraction (XRD) was used. The peaks in the XRD data correspond to different atomic spacings within the structure. From this it is possible to quantify exactly what was grown in terms of both composition and layer thickness. The XRD data is in .X01 format and can be opened with the open source X'Pert Epitaxy to view the peaks. Fourier...

The data are archived in an Excel spreadsheet, with individual rows representing different participants, and columns representing participant responses to individual online survey questions (questions and response options are provided at the top of each column).  Questions cover demographic variables, means of XLI diagnosis/carrier status, family history of cardiovascular issues, comorbid medical conditions, precipitants/nature/developmental course/severity of any self-reported heart arrhythmias and their treatments, and opinions relating to cardiac screening for individuals carrying XLI-associated genetic deletions. 

The data are associated with a study of how shading affect the power output performance of the solar cells and PV modules. The dataset here contains the original experimental data from meausurements of I-V curves of a systematic investigation where shading experiments were performed on solar cell and PV modules. The dataset also include simulated data of the correponding shading experiments based on a model reported in the paper.

Additional file 1.

Data include: 1. Input .ctf files for all grains, host anorthosite grains, and marginal zone grains 2. Exported orientation (IPF), physical parameters (shape factor SF, aspect ratio AR) and phase maps for each grain type for each zone (including all grains) 3. GROD, GOS, and KAM misorientation maps for each grain type for each zone (including all grains) 4. Pole figures for each grain, including both 1 point per grain (1PPG) and all data (Orientation...

These data are from a study involving the enhanced photon collection and imaging of a solid-state room temperature quantum light source using a near refractive index matched hemispherical solid immersion lens. We use power dependent photon counting measurements to deterministically enhance the number of photons extracted from the semi-polar Gallium Nitride host from a pre-selected quantum light source. The dataset includes 13 .CSV files with the raw data for each figure in the manuscript. The...

Controlled experiments were conducted to investigate the surface damage caused by perpendicular and oblique impacts of bullets into sandstone and limestone targets. Individual bullets fired in conditions simulating modern rifles at typical combat distances excavated craters with diameters from 22 to 74 mm and depths from 4 to 24 mm. Limestone target craters were up to twice as large and deep as those in sandstone. These craters have a complex shape consisting of a central...

Set of data was obtained for various CH4/NH3/H2 blends using an industrial scale swirl burner with a swirl no, Sg = 1.05. Instability data in terms of flashback, lean blow off and rich blow off are provided in the 1st sheet, titled 'Stability Maps Data'. Exhaust emissions was measured by a bespoke state-of-art Quantum Cascade Analyser (CT5100) for some selected blends with an equivalence ratio of 1.2. This emissions data is provided in the 2nd...

Set of data was obtained for various NH3/H2 blends using an industrial scale swirl burner with a swirl no, Sg = 1.05. Exhaust emissions was measured by a bespoke state-of-art Quantum Cascade Analyser (CT5100) for various blends with an equivalence ratio of 0.65. Emissions data (N2O, NO, N2O, NH3) at set of fixed thermal powers and Re are provided in the 1st and 2nd sheet,respectively, titled 'Emissions Data - Thermal Powers' and 'Emissions Data -...

This dataset consists of x-ray photoelectron spectroscopy measurements collected for samples of gallium arsenide (GaAs) that were functionalised with multiple biomolecules via a photochemical approach. Different stages of functionalisation were characterised.

Stripped-back representative VCSEL devices with a simple fabrication process that very closely approaches the performance of standard BCB-planarised devices have been produced. These VCSEL Quick Fabrication (VQF) devices achieve threshold currents only 0.3 mA higher than that of a standard device produced from the same material. The predictability of standard performance from VQF performance is also robustly assessed in terms of temperature effects to account for the observed disparities. This dataset contains 10 sub-folders named...

This dataset was produced in course of a density functional theory (DFT) study of trends and mechanisms of guaiacol hydrodeoxygenation. Six transition metal surfaces, Fe (110), Co (0001), Ni (111), Cu (111), Pd (111) and Pt (111), were investigated as catalysts for the HDO of lignin derivates to benzene, where guaiacol was used as a model compound derived from lignin. This work used the generalised gradient approximation (GGA) with the revised functional of Perdew-Burke-Ernzerhof (RPBE)....

Low-energy electron microscopy (LEEM) taken as intensity-voltage (I-V) curves provides hyperspectral images of surfaces, which can be used to identify the surface type, but are difficult to analyze. Here, we demonstrate the use of an algorithm for factorizing the data into spectra and concentrations of characteristic components (FSC3) for identifying distinct physical surface phases. Importantly, FSC3 is an unsupervised and fast algorithm. As example data we use experiments on the growth of praseodymium oxide or...

In the excel sheet provided, different blends at different Re and equivalence ratio has been assigned Test Point (TP) numbers. All these data were taken in an industrial scale swirl burner with a swirl no. of 1.05. Re numbers were varied by changing the total flow rates. In the zipped folder, raw spectrometer data for each TP are provided.

Critical thermal maximum of juvenile brook trout measured after 1, 4, 8, 16, or 30 days of acclimation under ambient, +3°C, or +6°C thermal regimes.